www.kraun.itWireless Access Point 54MB Single PortUser’s ManualCod. KR.XJ
www.kraun.it 10User’s Manual2. Enter a simple description of the wireless station in the Description field. For example: Wireless station A.3. Privile
www.kraun.it11User’s Manual• DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within you
www.kraun.it 12User’s ManualThere are five submenus under the System Tools menu (shown in figure 5-22): Firmware, Factory Defaults, Reboot, Password,
www.kraun.it13User’s Manual5.7.5 LogThis page (shown in figure 5-27) allows you to query the Logs of the AP.Figure 5-27: System LogThe AP can keep log
www.kraun.it 14User’s Manual3) Click on Properties. The following TCP/IP Properties window will dis-play and the IP Address tab is open on this window
www.kraun.it15User’s Manualc. On the DNS Configuration tab, click Enable DNS radio, and type your computer name in to the Host field and a Domain (suc
www.kraun.it 16User’s ManualIntegrity Protocol (TKIP). TKIP addresses the encryption weaknesses of WEP. Another key component of WPA is built-in authe
www.kraun.it17User’s Manual
www.kraun.it2User’s ManualContentsPackage contents 31. About this Guide 31.1 Purposes 31.2 Conventions 31.3 Overview of this User Guide 32. Intr
www.kraun.it3User’s ManualPackage contentsThe following contents should be found in your box:• One Wireless Access Point 54MB Single Port• One AC po
www.kraun.it 4User’s Manual2.3.1 The Rear PanelThe rear panel contains the following contents (Viewed from left to right in figure 2-2):• Wireless ant
www.kraun.it5User’s ManualIf the result displayed is similar to that shown in figure 4-1, the connec-tion between your PC and the AP has been establis
www.kraun.it 6User’s Manual• Type - Choose the type for the IP Address: Static IP, Dynamic IP (DHCP). If you choose Static IP, you need to configure
www.kraun.it7User’s ManualFigure 5-6b: Wireless Settings for No Region Option• Disable Wireless - The wireless of this AP can be enabled or disabled
www.kraun.it 8User’s ManualHere is an example of how to configure multi-point bridging. Please fol-low the instructions:Figure 5-10: Point to Multi-po
www.kraun.it9User’s Manual• Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be
Comments to this Manuals